![](https://cms-static.wehaacdn.com/hoards-com/images/header_handyhints.31.png)
Holds three-point hitch steady
![Rerod holds three-point hitch steady](https://cms-static.wehaacdn.com/hoards-com/images/1306_433-hh.2105.gif)
I made this three-point arm holder by cutting a piece of rerod about 2 inches longer than the width from outside to outside of the arms. I welded a washer on one end, and on the other end I drilled a 1/4-inch hole and stuck a hitch safety pin through it (with a washer between the arm and pin). Now we aren't replacing bungees or baler twine all the time.
Matt Lengacher, Indiana